Series MXP 35 TO-220
Derating
Derating (thermal resist.) MXP-35: 0.23 W/K (4.28 K/W)
Without a heat sink, when in open air at 25°C,the MXP-35 is rated for 2.50 W. Derating for temperature above 25°C is 0.02 W/K.
Case temperature must be used for definition of the applied power limit. Case temperature measurement must be done with a thermocouple contacting the center of the component mounted on the designed heat sink. Thermal grease should be applied properly.
Dimensions in millimeters
Specifications
|
Resistance ranges |
0.05 Ω ≤ 1 MΩ (other values on special request) |
|
Resistance Tolerance |
±1 % to ± 10 % /±0.5 % on special request for limited ohmic values |
|
Temperature Coefficient |
< 3 Ω: ask for details / ≥ 3 Ω < 10 Ω: ±100 ppm + 0.002 Ω/°C / ≥ 10 Ω: ±50 ppm/°C (referenced to 25 °C, ΔR taken at +85°C) |
|
Power rating |
35 W at 25°C bottom case temperature |
|
Maximum operating voltage |
350 V |
|
Dielectric strength voltage |
1,800 V AC |
|
Insulation resistance |
> 10 GΩ at 1,000 V DC |
|
Momentary overload |
2x rated power with applied voltage not to exceed 1.5x maximum continuous operating voltage for 5 sec. ΔR ±(0.3 % + 0.01 Ω) max. |
|
Moisture resistance |
MIL-STD-202, method 106 ΔR = (0.5 % + 0.01 Ω) max. |
|
Thermal shock |
MIL-STD-202, method 107, Cond. F, ΔR = (0.3 % + 0.01 Ω) max |
|
Working temperature range |
-55°C to +175°C |
|
Load life |
MIL-R-39009, 2,000 hours at rated power, ΔR ± (1.0 % + 0.01 Ω) max. |
|
Terminal strength |
MIL-STD-202, method 211, Cond. A (Pull Test) 2.4 N, ΔR = (0.2 % + 0.01 Ω) max. |
|
Vibration, high frequency |
MIL-STD-202, method 204, Cond. D, ΔR = (0.2 % + 0.01 Ω) max. |
|
Lead material |
tinned copper |
|
Torque |
0.7 Nm to 0.9 Nm |
|
Heat resistance to cooling plate |
Rth < 4.28 K/W |
|
Weight |
~2 g |
Ordering Information
| Type | ohmic | Value | TOL |
| MXP35 | 100R | 5% |
FAQ
What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website.
